product categories

Stainless Steel
Carbon Steel
Rolled Steel
- Cold Rolled Steel Sheet/Coil
- Hot Rolled Steel Sheet/Coil
Galvanized Steel
- Galvanized Steel Sheet
- Galvanized Steel Coil
Color Coated Steel
- Color Coated Steel Sheet
- Color Coated Steel Coil
Aluminum Products
Lead Products
Profile Steel

products

Aluminum Coil 5000 series

Available Size:: Thickness: 0.1-350mm, Width and length: as customer's requirment

Material:: 3A, 5052,5083,5005,5A05, etc.

Payments:: 30% T/T deposit,70% T/T or 70% L/C at sight balance

Inquiry

Product Details

5000 Series aluminum coil

The 5000 series aluminum coil belongs to the Al-Mg series alloy, which is widely used and is a promising aluminum alloy. The main element is magnesium, and the magnesium content is between 3-5%. It can also be called aluminum-magnesium alloy. The main features are low density, high tensile strength, high elongation, good corrosion resistance, excellent weldability, good cold workability and medium strength. In the same area, the weight of aluminum-magnesium alloy is lower than other series. Therefore, it is commonly used in aviation, such as aircraft fuel tanks, and is also widely used in conventional industries. The processing technology is continuous casting and rolling, which belongs to the hot-rolled aluminum coil series, so it can be used for oxidation deep processing. In my country, the 5000 series aluminum coill is one of the more mature aluminum coil series .

Product Parameter

Alloy No.	Thickness (mm)：	Width (mm)：	Temper：
A1050,A1060, A1070 A1100,A1235,A1245	0.2-3.0	20-1900	O,H12,H22,H14,H24,H16,H26,H18
A1050,A1060, A1070 A1100,A1235,A1245	4.0-12.0	1000-1900	H111,H112
A3003,A3004,A3105	0.2-4.0	20-1900	O,H12,H22,H14,H24,H16,H26,H18
A3003,A3004,A3105	4.0-12.0	1000-1900	H111,H112
A5052,A5083,A5754 A5005	0.2-4.0	20-1900	O,H12,H22,H14,H24,H16,H26,H18
A5052,A5083,A5754 A5005	4.0-12.0	1000-1900	H111,H112
A6061,A6082,A6063	0.8-3.0	20-1900	O
A8011,A1145,A1235	0.005-0.2	20-1700	O,,H18,H24
Coating thickness	PE coating:more than 16 micron
Coating thickness	PVDF coating:more than 25micron
Standards	ASTM-B209. EN573-1, GB/T3880.1-2006
MOQ	1 TON
Payment term	30% TT advance + 70% TT balance , L/C
Delivery Time	7-15 days
Packing	Standard package , Wooden case

Application

Application :

Iamp Fan leaves

Electronic Billboards

Bus body Kitchen sink

Chemical equipment Decorations

Reflective devices Mainly used insigns

Bell surface and disk Welding parts

Heat exchangers Sheet metal processing parts

Building exterior decoration Deep drawing or spinning hollowware

High-rise buildings and factories wall decoration

Our after-sale Service

Our Product Services

Cut large coils into small coils or Strip.
For steel coils, we can cut one large steel coil into small steel coils for loading at seaport; because for container shipping, each container usually loads weight can not be over 26 tons, but each large coil is usually about 28 tons, so one large coils has to be cut into small coils, and because the forklift usually takes 7-10 tons at seaport, so for easy loading into conatiner, each large steel coil usually is cut into 3 small coils. For bulk vessel shipping, it usually demands coils weight under 18 tons, so most times, also need cut one large coil into 2 small coils.
Open flat coils into steel plate.
For final application, need open flat the coils and cut the coils into steel plate, so we open flat the coils and cut the coils to steel plate to the sizes as required. For saving cost for loading by container, load into 20 feet containers, so cut the length under 5800mm, usually as required to cut to length 2440mm and 5800mm, width usually be 1220mm and 1500mm.after cutting the steel coils into steel plate, we can do black paints on the surface of the plate to make the plate to be anti-rust.

Packaging & Shipping

Common Package:
Waterproof Kraft Paper + Wooden Pallet (each 3 tons) + Bundle with steel strip.

Or Package can also according to your requirements.

The time of delivery:
Within 7-10 days after receipt of advance payment