HOME  >  PRODUCTS  >  Rolled Steel  >  Cold Rolled Steel Sheet/Coil


SPCC Cold Rolled Sheet Cold Rolled Steel Plate

Available Size:
The minimum thickness is 0.2-4mm, the width is 600-2 000mm, the length is 1200-6000mm
Q195A-Q235A、Q195AF-Q235AF、Q295A(B)-Q345 A(B);SPCC、SPCD、SPCE、ST12-15;DC01-06
30% T/T deposit,70% T/T or 70% L/C at sight balance

Product Details

The cold-rolled sheet has good performance, that is, cold-rolled steel strips and steel sheets with thinner thickness and higher precision can be obtained by cold rolling, with high flatness, high surface finish, clean and bright surface of the cold-rolled sheet, and easy to be coated It has a wide range of processing, variety, and wide use. At the same time, it has the characteristics of high stamping performance, non-aging, and low yield point. Therefore, cold-rolled sheets have a wide range of uses, mainly used in automobiles, printed iron barrels, construction, building materials, bicycles and other industries. At the same time, it is also the best choice for the production of organic coated steel sheets.

Product Parameter

Steel plate/coil

SPCC Cold Rolled Steel Sheet



Wall Thickness(mm)





JIS G 3141 : Cold-reduced carbon steel sheet and strip


A53B, A106B, API 5L


Black painting, varnish paint, anti rust oil, hot galvanized, cold galvanized, 3PE


API5L ISO 9001:2008 TUV SGS BV etc







0.15 max

0.60 max

0.100 max

0.05 max



Yield Strength


tensile strength





Cold-rolled sheet steel is the abbreviation of ordinary carbon structural steel cold-rolled sheet, also known as cold-rolled sheet, commonly known as cold-rolled sheet, and sometimes it is mistakenly written as cold-rolled sheet. The cold plate is a hot-rolled strip of ordinary carbon structural steel, which is further cold-rolled into a steel plate with a thickness of less than 4mm. Because rolling at room temperature does not produce scale, the cold plate has good surface quality and high dimensional accuracy. Coupled with annealing treatment, its mechanical properties and process properties are better than hot-rolled thin steel plates. In many fields, especially In the field of home appliance manufacturing, it has gradually replaced hot-rolled steel sheets.

Our after-sale Service

Our Product Services

Cut large coils into small coils or Strip.
For steel coils, we can cut one large steel coil into small steel coils for loading at seaport; because for container shipping, each container usually loads weight can not be over 26 tons, but each large coil is usually about 28 tons, so one large coils has to be cut into small coils, and because the forklift usually takes 7-10 tons at seaport, so for easy loading into conatiner, each large steel coil usually is cut into 3 small coils. For bulk vessel shipping, it usually demands coils weight under 18 tons, so most times, also need cut one large coil into 2 small coils.
Open flat coils into steel plate.
For final application, need open flat the coils and cut the coils into steel plate, so we open flat the coils and cut the coils to steel plate to the sizes as required. For saving cost for loading by container, load into 20 feet containers, so cut the length under 5800mm, usually as required to cut to length 2440mm and 5800mm, width usually be 1220mm and 1500mm.after cutting the steel coils into steel plate, we can do black paints on the surface of the plate to make the plate to be anti-rust.

Packaging & Shipping

Common Package: 
Waterproof Kraft Paper + Wooden Pallet (each 3 tons) + Bundle with steel strip.

Or Package can also according to your requirements.

The time of delivery:
Within 7-10 days after receipt of advance payment